Feather Edge Panel - FLAT TOP
Our Feather edge panels are made with 3 back rails of 30mm by 50mm horizontal support beams at the top, middle and bottom of the panel.
All wood is tanilized for extra weather protection and the panels are supplied ready to be fitted.
** Please note: round top sizes are based on the height at the shoulder of the panel NOT the apex.
** Also our smaller height feather edge panels may be supplied with only 2 back rails. One at the top and the bottom as the middle back rail is not always need.
* Please note : Our panels are pre-treated and do not need painting, doing so may cause the timber to warp.
* Please note : Also when ordering round top panels the top caps will need fitting to the top once you have the fencing at home. You will need to do this with some small nails