358 Flat Beam Prison Mesh 1.8M
358 Flat Beam Prison Mesh is by far the most secure and rigid of all our mesh systems. This prison mesh is stylish yet also provides a good level of privacy compared to other mesh systems. Like all our mesh it is stocked in Green Ral 6005 but can be re powder coated in 620+ colours on request.
Prison Mesh is ideally suited where maximum security is required and the small gaps of the mesh and the thickness of the wire make scaling and cutting Prison Mesh difficult. The mesh is fixed to the post with full length stretcher bars and insert bolts and there are 3 hole positions at each fixing point for stepping of the fence where required.
The apertures in the mesh are all the same size and are 12.7mm by 76.2mm and the wire used on this prison mesh is 4mm thick galvanised and powder coated wire.
The Panels are 2.5 M wide and line up on the post to the next panel meaning the post centers are also 2.5M. The post is atcually 2.4M High which allows you to dig in the 0.6M under ground unless you choose for the posts to base plated in which case the posts will be cut to 1.8M and the base plate added.
The posts are made of 60mm by 60mm box section steel which are galvanised and powder coated green Ral 6005. If you are digging in the posts we would recommend no less than 1.5 bags of our post mix per post.