Remix Post Mix Concrete is suitable for use in fixing all types of wooden, metal & concrete posts.
The mix is a kiln dried, pre blended, factory produced quick setting concrete which hardens in approximately 10 minutes after water addition, depending on ambient conditions.
- Dig hole to required size for post, half fill hole with water & place the post in the hole.
- The material is already pre mixed & there is no need for mixing, it can simply be emptied straight from the bag into the hole.
- Add the Remix Post Mix Concrete uniformly around the post until it is above the level of water. If any dry powder remains visible at this stage, add additional water until absorbed by the material.
- Adjust the post into position & support appropriately until material set occurs after approximately 10 minutes.
Once concrete has set, cover with earth, grass or decorative aggregate as required.
- Additional Information
specsheet N/A overall No bpoverall No subdesc No
This product can normally be despatched immediately when in stock, however any customisations you may require will add to the lead time.